 |
Solar Power Plants 
|
|
|
|
| |
Solar Thermal Power Plants |
| Basic Engineering for Feasibility
Study and Detailed Project Report: |
 |
Selection of Technology (Parabolic
Trough, Fresnel, Solar Tower) |
|
Selection of Reflectors and Receivers and
the other components of Concentrating System. |
 |
Selection of power plant cycle and basic
type of equipment. |
|
Preliminary Plot Plant and Equipment Layout
drawings. |
|
Heat and Mass Balance for Solar Thermal. |
|
Selection of type and size of power plant
equipment i.e. Steam Generating Solar field and Steam
Turbine Generators, etc. |
|
Selection of size and type of Material Handling
systems (Water) as applicable based on type of power plant
cycle / equipment |
|
Selection of size and type of various auxiliary
systems / equipment e.g. compressed air system, Fire protection
system. |
|
Conceptualization of power evacuation system
and power distribution system depending upon type and
operating philosophy of Power Plant. |
|
Conceptualization of Instrumentation and
Controls requirements |
|
Conceptualization of Civil and Structural
works requirement |
|
Estimation of project cost and unit generation
cost |
| |
|
|
| Mechanical |
|
Plot Plan and Equipment Layouts
for various buildings and area |
|
Selection and specifications of Power Plant
Equipment like Solar Field ( Solar Reflectors, Receivers
and associated systems) and auxiliaries, Steam turbine
Generator and auxiliaries. |
|
Design and specification of storage and
handling system. |
|
Design and specifications of Water systems,
Compressed air system, HVAC system, Misc. material handling
system. |
|
Design of P &I Diagrams for Feed water,
Steam and Condensate system; Raw water and water treatment
systems; Cooling water system; Compressed air system.
|
|
Piping Design and Drawings including piping
material specifications, layout drawings, isometrics,
stress analysis, bill of materials, pipe supports etc.
|
|
Design specifications for Fire Protection
Equipments /Systems. |
|
| |
| Electrical |
|
Design of power evacuation system.
|
|
Estimation of auxiliary power (Normal and
Emergency). |
|
Design of High Tension and Low Tension power
distribution system. |
|
Design / Sizing and specification of Electrical
equipments like Transformers, Switchgear (H. T. &
L. T.), Cables, Lighting fittings etc. |
|
Electrical system study including Relay
Co-ordination. |
|
Design and specification of Variable Speed
Drives for special applications. |
|
Design and specifications of various service
systems like Plant Communication, Fire Alarm and Detection. |
| |
|
|
| Instrumentation |
|
Design and specifications of
Instrumentation and Control Systems including PLC, SCADA,
DCS. |
|
| |
| Architectural, Civil & Structural |
|
Architectural, Civil and Structural
design including estimation of quantities for tender document,
tender document for civil and structural works, plot development,
drawings for statutory approvals and construction drawings
for all buildings / areas, |
|
| |
| Procurement |
|
Procurement assistance to client
i.e. Floating the enquiries to selected Bidders, Receiving
Bids, Bid analysis (Technical and Commercial), Purchase
recommendation, Preparation of Contract documents, Review
of Vendors’ Drawings etc. |
|
| |
| General |
|
Project schedules and Cost estimates.
|
|
Hazard and Operatability (HAZOP) Study.
|
|
Technical assistance to meet statutory requirements
including drawings and documents. |
| |
|
|
| Inspection and Expediting Services |
|
Review of Quality Assurance
Plans (QAPs). |
|
Visiting Vendors’ works for inspection
and expediting. |
|
Inspection and expediting reports. |
| |
|
|
| Construction and Commissioning Supervision
Services |
|
Complete site supervision
and management by deputing competent Project Manger /
Construction Manager and supporting staff at site. The
responsibilities shall include: |
|
Quality of construction / erection work.
|
|
Planning and controlling the Construction
/ Erection work to meet the project schedule. |
|
Reporting to design office the site progress
with short falls, if any, and corrective measures. |
|
| |
| Operation and Maintenance |
|
Operation and Maintenance of
the complete power plant with the agreed PLF |
|
The scope of work can include spares contract
also. |
|
Complete plant operation and maintenance
is managed by a dedicated team right from general manager
to assistants. |
|
We have experience of operation and maintenance
of plants of various sizes. |
|
| |
| |
| Home
| About
us | Services
| Projects
| Careers
| Contact
us | Site
map |
| |
